Unicorn Skeleton -DTF Transfer Print

6.5" wide x 6.5" tall
DTF transfer print ONLY - Shirt is not included

Pressing - ALL DIRECTIONS VARY BY MACHINE

• Temperature: Set your h5eat press to 280-325°F. I prefer mine at 325°F.
• Time: Press for 15-30 seconds. I prefer 30 seconds.
• Pressure: Apply medium pressure. I use the HTVRont Auto Press (linked in my Amazon Store Front).
• Peel: Let the transfer cool for 30-60 seconds before peeling off the carrier sheet. I let mine cool to the touch, about a minute.

Washing:

• Inside Out: Always wash inside out to protect the DTF transfer from abrasion.
• Cold Water: Use cold water in wash cycle to prevent fading or peeling.
• Gentle Cycle: Opt for a gentle or delicate wash cycle to avoid excessive agitation.
• Mild Detergent: Use a mild detergent to preserve the transfer's quality.
• Tumble Dry Low: Set it to low heat to minimize shrinkage and prevent damage.
• Avoid Ironing: Direct heat from an iron can damage the transfer. If necessary, iron on a low setting with a pressing cloth between the iron and the garment.
• Do Not Bleach: Avoid using bleach or fabric softeners, as they can affect the transfer's appearance.